Notification Log Commands
nlm
Row Status: active
View Name
: defaultview
Subtree OID
: 1
View Type
: included
Storage Type : volatile
Row Status
: active
Console#
Table 31: show snmp view - display description
Field
View Name
Subtree OID
View Type
Storage Type
Row Status
This command enables or disables the specified notification log.
Syntax
[no] nlm filter-name
filter-name - Notification log name. (Range: 1-32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆
Notification logging is enabled by default, but will not start recording
information until a logging profile specified by the
command is enabled by the nlm command.
Disabling logging with this command does not delete the entries stored in
◆
the notification log.
Example
This example enables the notification log A1.
Console(config)#nlm A1
Console(config)#
Description
Name of an SNMP view.
A branch in the MIB tree.
Indicates if the view is included or excluded.
The storage type for this entry.
The row status of this entry.
– 173 –
Chapter 5
| SNMP Commands
snmp-server notify-filter