Table of Contents
Advertisement
User Manual
2-5.2 Log
This section describes that display the system log information of the switch
Web Interface
To display the log configuration in the web interface:
1. Click Syslog, Log.
2. Display the log information.
Figure2- 5.2: The System Log configuration
Parameter description:
Auto-refresh
To evoke the auto-refresh icon then the device will refresh the log automatically.
Level
Level of the system log entry. The following level types are supported:
Information level of the system log.
Warning: Warning level of the system log.
Error: Error level of the system log.All: All levels.
ID
ID (>= 1) of the system log entry.
Time
It will display the log record by device time. The time of the system log entry.
Message
It will display the log detail message. The message of the system log entry.
Upper right icon (Refresh, clear,....)
You can click them for refresh the system log or clear them by manual, others
for next/up page or entry.
24
Publication date: Feb., 2013
Revision A3
Advertisement
Table of Contents
