Table of Contents
Advertisement
loopback-detection
release
show loopback-
detection
Command Mode
Global Configuration
Command Usage
Refer to the
loopback-detection recover-time
conditions which constitute loopback recovery.
Example
Console(config)#loopback-detection trap both
Console(config)#
This command releases all interfaces currently shut down by the loopback
detection feature.
Syntax
loopback-detection release
Command Mode
Privileged Exec
Example
Console#loopback-detection release
Console(config)#
This command shows loopback detection configuration settings for the switch
or for a specified interface.
Syntax
show loopback-detection [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: Always 1)
port - Port number. (Range: 1-52)
Command Mode
Privileged Exec
Example
Console#show loopback-detection
Loopback Detection Global Information
Global Status
: Enabled
Transmit Interval : 10
Recover Time
: 60
Chapter 15
– 402 –
| Loopback Detection Commands
command for information on
Advertisement
Table of Contents
