Measuring System; Measurement Loop; Measurement Loop Description; Factory Setting - Vega EL 11 Operating Instructions Manual

Set-up

Measuring system

In this sensor you can choose your appropriate
electrode. You can see the electrode type on
the type plate of the instrument.
Choose the correct electrode out of the list, e.g.
EL 21 14 mm PTFE. In front of the listed
electrodes you see the number of the electrode
type. The number to your electrode is stated on
the type plate. See also 1.6 Type plate. When
your electrode is not stated in the list, choose
´not configured´ . Push the button for saving to
confirm the choice.
In this window you can carry out additionally a
reset. All adjusted values are then reset to
factory setting. Note that also the adjustment
will be deleted.
Tag number, measurement loop designation
etc. from the HART ® or VVO-adjustment
however remain unchanged.

Factory Setting

0 Operate
1 Min. adjustment
2 Max. adjustment
3 Integration time
4 Reverse characteristics
5 Linearisation
6 Sensor optimization
7 Simulation current
8 Reset
9 Offset correction
Capacitive electrodes EL 4 ... 20 mA - compact
---
4 mA at 0 pF
20 mA at 3000 pF
0,5 s
4 ... 20 mA
off
mode 1 (90°)
off
---
already saved values
remain

Measurement loop

In this window you can make the measurement
loop designation.
Measurement loop no. (Sensor-TAG)
In this field you can enter a measurement loop
number, e.g. Tank 15 - 3. Max. 16 positions are
available.

Measurement loop description

In this field you can specify your measurement
loop in detail, e.g. level measurement - cleaning
solution.
Up to 80 positions can be entered.
Application
For capacitive electrodes Level measurement is
fixed adjusted and cannot be modified.
Program
In this menu point you can modify the
adjustments for the program.
Language
Here you can modify the language of the pro-
gram.
User access
With this function you can modify the user name
and the password or deactivate the password
request.
31