Adjustment Steps - Vega EL 11 Operating Instructions Manual

Set-up

Adjustment steps

On the following pages you see the menu plan
®
to the HART -handheld in relation with
capacitive electrodes.
The most important adjustment steps are
marked in the menu plan with the figures
A ... D.
General information to the HART
When you enter or modify parameters, you
have to push the key " ENTER ". Hence the
adjustment is saved in the handheld but not in
Generic: SENSOR
PV LRV
0.000 m
10.000
HELP DEL ABORT ENTER
Empty adjustment without
medium
the sensor itself.
After you have pushed " ENTER ", you have to
push " SEND ", to transfer the adjustment to the
Generic: SENSOR
1 PV LRV
2 PV URV
HELP SEND HOME
sensor.
After pushing of " SEND " a warning is
displayed.
When you push " OK ", the adjustment is
Generic: SENSOR
- WARNING-
Pressing "OK" will
change device output.
Put loop in manual
ABORT OK
Capacitive electrodes EL 4 ... 20 mA - compact
® -handheld:
4.1
(5.1)
transmitted to the sensor.
Another safety enquiry asks you to switch over
your system from manual to automatic
operation. Push " OK"
Generic: SENSOR
- WARNING-
Return control loop to
automatic control.
OK
With "HOME" you reach again the initial menu.
Generic: SENSOR
1 PV LRV
2 PV URV
HELP HOME
39