Verifying That Modem Installed Successfully In Windows - Multitech MultiModem iCell User Manual

DEVICE ACTIVATION AND INSTALLATION
10. Select MTSMCIP_MTCMRIP.INF and click Open.
11. Select your device from the list and click Next.
12. Choose the COM Port your device is connected to and click Next.
13. Click Finish to complete the install.

Verifying that Modem Installed Successfully in Windows

To verify that device installed correctly:
1. In the Phone and Modem Options window, highlight your modem and click Properties.
2. Go to the Diagnostics tab and click Query Modem.
If the device is working, the Command and Response section lists the commands sent and their response. When
you are done testing, close the Phone and Modem windows.
Note: If nothing appears in Command and Response, verify that you selected the correct modem. Click
Query Modem again and check the device's LEDs. If you selected the correct device, the TR LED lights and
the TD and RD LEDs blink.
42
®
MultiModem iCell MTCMR User Guide