Multitech MultiModem iCell Quick Start Manual
Intelligent wireless modem
Hide thumbs
Also See for MultiModem iCell:
- User manual (45 pages) ,
- User manual (30 pages) ,
- User manual (55 pages)
Related Manuals for Multitech MultiModem iCell
Summary of Contents for Multitech MultiModem iCell
- Page 1 ® MultiModem iCell Intelligent Wireless Modem Quick Start Guide Downloaded from Elcodis.com electronic components distributor...
- Page 2 Systems, Inc. World Headquarters Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 Phone: 763-785-3500 or 800-328-9717 Fax: 763-785-9874 Internet Address: http://www.multitech.com Technical Support Country By Email By Phone Europe, Middle East, Africa support@multitech.co.uk +(44) 118 959 7774 U.S., Canada, all others support@multitech.com...
- Page 3 MultiModem iCell Intelligent Wireless Modem Introduction This guide shows you how to set up your MultiModem iCell Intelligent Wireless modem. For detailed information, product description and specifications, activation and installation, and using your wireless modem, refer to the User Guide, available on the MultiModem iCell CD accompanying your wireless modem.
- Page 4 MultiModem iCell Intelligent Wireless Modem Consult the manufacturers of the medical device to determine if it is adequately protected. ● Operation of the MultiModem in the vicinity of other electronic equipment may cause interference if the equipment is inadequately protected. Observe any warning signs and manufacturers’...
- Page 5 MultiModem iCell Intelligent Wireless Modem Activate Your Wireless Account Please refer to the wireless account Activation Notices included with your unit and located on the MultiModem CD. Choose the one for your wireless network provider and follow the directions to activate your account.
- Page 6 MultiModem iCell Intelligent Wireless Modem Connect the Antenna, Serial Cable, GPIO Cable, and Power ● Antenna. Connect a suitable antenna to the SMA connector (see the User Guide for antenna/RF specifications). ● Serial Cable. Connect DB9 connector (9-pin) end of the serial cable to the RS232 connector on the modem and the other end to the serial port on the PC.
- Page 7 AT commands can be used to operate, configure, and query your modem. The AT Command Reference Guides are included on the MultiModem iCell CD and on the Multi-Tech Web site. Internet Access See the User Guide for Internet access directions.
- Page 8 82100375L Downloaded from Elcodis.com electronic components distributor...
Need help?
Do you have a question about the MultiModem iCell and is the answer not in the manual?
Questions and answers