Verifying That Your Modem Is Properly Installed - Multitech MultiModem MTCBA‐H3‐U1 User Manual

When the Driver Software Installation window states "Your device is ready to use", your modem is installed.
6.
Verifying That Your Modem is Properly Installed
After you have successfully installed the MultiModem driver, you return to the Phone and Modems Options
1.
window. Make sure that the modem is now listed under the column Modem and Attached To (the correct
com port).
Select the modem and then click Properties.
2.
A Properties window opens for the Multi‐Tech modem. Click the Diagnostics tab.
3.
In the middle of the window, click Query Modem. Windows queries the Multi‐Tech modem. If the query is
successful a group on the tab appears, showing the columns Command and Response.
If this process passes, your modem is properly installed and ready for use. To close the Properties window,
4.
click OK.
To close the Phone and Modems Options window, click OK.
5.
Multi‐Tech Systems, Inc. MultiModem Cell User Guide
Chapter 2 – Activating and Installing the Modem
13