Table of Contents
Advertisement
getparam #
setparam # #
getparam 1271 X
flush #,#,#,#,#,#,#
readops #
sn #
banlist
crashlog
delete_all_sms
lvcangetprog
lvcansetprog #
lvcangetinfo
getcontsens
6.1.1
Response details
Data Link
GPRS
Phone
SIM
OP
Signal
NewSMS
Roaming
SMSFull
LAC
Cell ID
SMSFull: 0 LAC: 1 Cell ID: 864
Downloaded from
www.Manualslib.com
Readout parameter value according entered ID.
# - ID value.
Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
X values can be 1,2,3.
Initiates all data sending to specified target server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
1 – send first 20 operator codes, 2 – send from 21
operator codes, 3 – send all other operator codes
Static navigation, 1 – enable, 0 – disable
Banned operators information
Device last information before unexpected reset
Deletes all SMS
CAN Program Number request by SMS
Set LVCAN program number
Get LV-CAN info by SMS
Get IDs of connected temperature sensors
getstatus
Indicate module connection to server at the moment: 0 – Not
connected, 1 – connected
Indicate if GPRS is available at the moment
Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 –
ringing, 4 – call in progress, 5 – asleep
SIM Status: 0-ready, 1-pin, 2-puk, 3-pin2, 4-puk2
Connected to GSM Operator: numerical id of operator
GSM Signal Quality [0-5]
Indicate if new message received
0 – Home Network, 1 – roaming
SMS storage is full? 0 – ok, 1 – SMS storage full
GSM Tower Location Area Code
GSM Tower Cell ID Code
Example: Data Link: 0 GPRS: 1 Phone: 0 SIM: 0 OP: 24602 Signal: 5 NewSMS: 0 Roaming: 0
manuals search engine
st
to 40
Description
Yes
Yes
Yes
No
th
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
55
Advertisement
Table of Contents
