Black Operator List (Id= 1272 X); Data Acquisition Modes Parameters; Home Network Gsm Operator Code "Vehicle On Stop" Parameters; Min Period (Id=1540) - Teltonika FMA120 User Manual

8.4.16 Black Operator list (ID= 1272 X)

X is between 0 and 49, X shows the index of the operator code from the blacklist (the operator
code has to be previously configured in the list). Up to 20 blacklist operator codes may be
configured in 1 SMS. Example: setparam 1272 16 24602,24603,24605.
unchanged in the configuration.
Minimum
value
Empty
8.5
8.5.1

8.5.1.1 Min Period (ID=1540)

0 it means no records by min period will be saved.
Minimum
value

8.5.1.2 Min Saved Records (ID=1543)

server. It has higher priority than Data Send Period (ID=1544).
Minimum
value

8.5.1.3 Send Period (ID=1544)

Minimum
value

8.5.1.4 GPRS Week Time (ID=1545)

prohibited to open the context. When modem's GPRS context is closing (for example changing
network) it is allowed to open it only at a defined time. It is possible to allow connections every
10 minutes up to once per day.
Schedule parameter format:
define timestamps with 10 minute interval. In first byte, first bit (LSB) defines if module should
connect to GPRS (send SMS) on Monday, second bit – on Tuesday and so on up to seventh bit –
Downloaded from www.Manualslib.com
Parameter defines the operator list. X defines the starting position that will be changed: If
th th th
Here 16 , 17 and 18
Maximum Recommended
value
7 digits

Data Acquisition Modes parameters

Home Network GSM operator code "Vehicle on STOP" parameters

This parameter indicates time interval in seconds in order to acquire new record. If value is
Maximum Recommended
value
0 2592000
This parameter defines minimum number of records in one data packet that can be sent to
Maximum Recommended
value
1 255
This parameter indicates frequency (time interval in seconds) of sending data to server.
Maximum Recommended
value
0 2592000
This parameter manages when it is allowed to open GPRS context. When module starts it is
Example value: 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
Time is defined as 19 byte array. First byte of array defines week days; the rest 18 bytes
manuals search engine
black operator codes are set. Note! Other operator codes are left
Goes with (depends on)
value parameters
-
Goes with (depends on)
value parameters
-
Goes with (depends on)
value parameters
1
GPRS Week Time (ID=1545
Goes with (depends on)
value parameters
Min Saved Records (ID=1543)
-
GPRS Week Time (ID=1545)
Value
type
U32
Value
type
U32
Value
type
U8
)
Value
type
U32
67