Records Settings; Gsm Settings, Gprs Part - Teltonika FM3622 User Manual

ignition detection or automatic ignition detection. For manual ignition user has to choose power
voltage levels by himself. For automatic ignition FM3622 automatically detects ignition, ignition
is on if power voltage is between 13,2 – 16 V, or 27 – 32 V.
5.9
most important thing is to know recent position of car, older records are being sent right after
newest records arrive to AVL application.
application termination. If FM3622 has already sent all records it waits for new records before
closing link. If new records are generated in the period of this timeout, and minimum count to
send is reached, they are sent to AVL application. This option is useful when GSM operator
charge for link activation.

5.10 GSM settings, GPRS part

password (optional – depending on operator), destination server IP and port, and allows to set
protocol used for data transfers – TCP or UDP.
and switch to GSM only then 3G is absent.
is used, APN should be entered as 'chap:
'internet' with CHAP authentication, it should be entered as 'chap:
about APN and authentication type should be provided by your GSM operator.
Downloaded from www.Manualslib.com
Also if Power Voltage is chosen for ignition source there is possibility to choose Manual

Records settings

Here user can modify if FM3622 device will send newest records first, meaning, that the
Activate Data Link Timeout is used to set timeout of link between FM3622 and AVL
Server Response Timeout is used to set time period waiting for response from server side.
'GPRS' defines main parameters for FM3622: GSM operator APN and GPRS username and
Yet user can choose if device will work only in GSM network, or it will prefer 3G network
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these
manuals search engine
Figure 22. Records settings configuration
' or 'pap:
<APN>
Figure 23. GPRS configuration
'. I.e. if operator is using APN
<APN>
'. Information
internet
33