Data Acquisition Modes Parameters; Home Network Gsm Operator Code "Vehicle On Stop" Parameters - Teltonika FM3622 User Manual

code which has to be configured. Up to 20 operator codes may be configured in 1 SMS. Example:
setparam 1271 16 24602,24603,24605
unchanged in the configuration.
Minimum
value
Empty
8.5
8.5.1
8.5.1.1
0 it means no records by min period will be saved.
Minimum
value
8.5.1.2
server. It has higher priority than Data Send Period (ID=1544).
Minimum
value
8.5.1.3
Minimum
value
8.5.1.4
prohibited to open the context. When modem's GPRS context is closing (for example changing
network) it is allowed to open it only at a defined time. It is possible to allow connections every
10 minutes up to once per day.
Schedule parameter format:
defines week days; the rest 18 bytes define timestamps with 10 minute interval. In first byte, first
bit (LSB) defines if module should connect to GPRS (send SMS) on Monday, second bit – on
Tuesday and so on up to seventh bit – which means Sunday. Eighth bit (MSB) is not used. If bits
value is 0 then device is not allowed to open GPRS context, but if it is already open – does not
close it. If value is 1 it will work as day minutes are defined in rest of the bytes. Day's minutes are
Downloaded from www.Manualslib.com
X defines starting position that is changed: If X is from 0 to 49, X means index of operator
th th
Here 16 , 17 and 18
Maximum Recommended
value
7 digits

Data Acquisition Modes parameters

Home Network GSM operator code "Vehicle on STOP" parameters

Min Period (ID=1540)
This parameter indicates time interval in seconds in order to acquire new record. If value is
Maximum Recommended
value
0 2592000
Min Saved Records (ID=1543)
This parameter defines minimum number of records in one data packet that can be sent to
Maximum Recommended
value
1 255
Send Period (ID=1544)
This parameter indicates frequency (time interval in seconds) of sending data to server.
Maximum Recommended
value
0 2592000
GPRS Week Time (ID=1545)
This parameter manages when it is allowed to open GPRS context. When module starts it is
Example value: 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
Time is defined as 19 byte array ('getparam' 1545 returns 20 bytes). First byte of array
manuals search engine
th
operator codes are set. Note! Other operator codes are left
Goes with (depends on)
value parameters
-
Goes with (depends on)
value
-
Goes with (depends on)
value parameters
GPRS Week Time (ID=1545)
1
Goes with (depends on)
value
Min Saved Records (ID=1543)
-
GPRS Week Time (ID=1545)
parameters
parameters
Value
type
U32
Value
type
U32
Value
type
U8
Value
type
U32
70