Introduction; Attention; Instructions Of Safety - Teltonika FM3622 User Manual

1 INTRODUCTION

1.1
1.2
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
DC. The allowed range of voltage is 10 V...30 V DC.
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
the power supply of the vehicle should be disconnected.
Downloaded from www.Manualslib.com

Attention

Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FM3622 has USB interface;
Please use cables provided with FM3622 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FM3622 connection.

Instructions of safety

This chapter contains information on how to operate FM3622 safely. By following these
The device could be supplied with 10 V...30 V DC power supply. The nominal voltage is 12 V
To avoid mechanical damage, it is advised to transport the FM3622 device in an impact-
When connecting the connection (2x6) cables to the vehicle, the appropriate jumpers of
Before dismounting the device from the vehicle, the 2x6 connection must be disconnected.
manuals search engine
wireless data transferring devices produce
6