General - DT SWISS F 535 ONE Technical Manual

Hide thumbs Also See for F 535 ONE:

1. GENERAL

1.1 VALIDITY

This manual describes the component specified on the front page and the footer. It is valid for the

construction level of the component on the 26.09.18. Deviations are possible and all items are subject to

technical changes.

1.2 SAFETY

The safety instructions are classified as follows:

DANGER

...indicates a hazardous situation that, if not avoided, will result in death or serious injury.

CAUTION

... indicates a hazard with a medium level of risk which, if not avoided, may result in minor or moderate

injury.

NOTE

... indicates a potentially hazardous situation that may result in damage to property.

1.3 TARGET GROUP

This manual is intended for end users and dealers. It offers the possibility for experienced users to carry out

small maintenance works on their own. If there are any doubts concerning the own skills, a DT Swiss service

center should be contacted.

If the work is not carried out properly, any warranty claims expire.

1.4 LAYOUT

The cover page and the footing provide information about the type of product and manual as well as the

version of the manual. On the back you will find the DT Swiss contact details. A list of all DT Swiss service

centers can be found at www.dtswiss.com.

This manual is intended for being printed as an A5 booklet. Only print this manual if electronic usage is not

possible.

F 535 - technical manual

Table of Contents