1.8 ENVIRONMENTAL PROTECTION
The statutory regulations shall apply. Whenever possible, waste has to be avoided. Waste, especially carbon,
lubricants, cleaners and any other fluids must be disposed in an environmentally compatible manner.
Only print this manual if electronic usage is not possible.
1.9 EXCLUSION OF LIABILITY
The activities listed in this manual may only be carried out by persons with sufficient specialist knowledge.
The user is liable for any damage or consequential damage caused by wrong maintained or wrong installed
components. If you have doubts, please contact your allocated DT Swiss pro level service center.
1.10 WARRANTY (EUROPE)
In addition to the general guarantee required by law, DT Swiss AG based in Biel/Switzerland, provides a
guarantee for 24 months from the date of purchase. DT Swiss AG shall reject any liability for both indirect
damage caused by accidents and consequential damage.
Any contradictory or extended national rights of the purchaser are not affected by this warranty. Place of
performance and jurisdiction is Biel/Switzerland. Swiss law shall apply.
Submit any warranty claims to your retailer or a DT Swiss service center. Any defects recognized by DT Swiss
AG as a warranty claim will be repaired or replaced by a DT Swiss service center.
Warranty and guarantee claims can only be made by the original purchaser with a valid sales receipt.
There shall be no claim under the guarantee for:
•
Normal wear and tear caused by use of the components
•
Incorrect assembly
•
Incorrect or nonexistent maintenance
•
Incorrectly completed repairs
•
Use of unsuitable products
•
Modification of components
•
Incorrect use or misuse
•
Carelessness
•
Leasing, commercial use or use in competitions
•
Damage caused by accidents
•
Delivery and transport damage
•
Modification, defacing or removal of the serial number
F 535 - technical manual
5