DT SWISS F 535 ONE Technical Manual page 25

7. Turn the remote wheel clockwise for about
270° until the limiter cap snaps into the
hole of the remote wheel with an audible
„klick" using a 19 mm wrench.
8. Continue turning the remote wheel about
70° until stop.
→ The lockout shaft is in position «LOCK».
9. Hold in this position and tighten the nut
with a torque of 5 Nm using the tool
FXTXXXXXXXX018645S.
10. Put the O-ring into the remote wheel.
11. Put on the compression cover.
FXTXXXXXXXX018645S
F 535 - technical manual
« klick »
19 mm
19 mm
25