DT SWISS F 535 ONE Technical Manual page 13

3.3 REMOVING THE LOWER UNIT
1. Make sure the valve cap is removed and the air is completely released (see „3.2 Releasing
The Air" on page 12).
2. Screw in the screw on the spring side clockwise into the lower unit using the tool
FXTXXXXXXXXXX018482S.
3. Screw in the screw on the damping side clockwise into the lower unit using the tool
FXTXXXXXXXXXX018482S.
→ After the screws have been screwed in, about 20 ml of oil runs out of both dropouts.
Collect the leaking oil using a suitable container.
4. Carefully remove lower unit.
5. Collect the leaking oil using a suitable container.
F 535 - technical manual
FXTXXXXXXXX018482S
27,5" 29"
13