DT SWISS F 535 ONE Technical Manual page 35

5. Carefully press the back of the valve cap
onto the valve insert and slowly release the
air.
6. Slowly compress the fork two times about
10 mm with the valve insert pressed and
pull it apart again.
→ This balances the positive and negative
air chambers.
6.4 OPENING THE AIR CHAMBER
1. Make sure the valve cap is removed and the
air is completely released.
2. Ensure that the area around the air
chamber cap is clean to prevent dirt from
entering the air chamber.
3. Unscrew the air chamber cap with a 15 mm
hexagon socket and a ratchet.
4. Pull the air chamber cap out of the air
chamber.
F 535 - technical manual 35