DT SWISS F 535 ONE Technical Manual page 36

6.5 CHANGING THE O-RING OF THE AIR CHAMBER CAP
1. Remove the O-ring from the air chamber
cap.
2. Clean the seat of the O-ring and the thread
of the air chamber cap and grease it
slightly.
3. Slightly grease the new O-ring and fit it onto
the air chamber cap.
6.6 ADDING / REMOVING APT VOLUME SPACERS
NOTE
RISK OF DAMAGE THROUGH THE INSTALLATION OF MORE THAN THREE VOLUME SPACERS!
If more than three volume spaces are mounted, the fork cannot compress completely.
• Never mount more than three volume spacers!
1. Add or remove the volume spacer using a
28 mm wrench.
→ The maximum number of three volume
spacers must not be exceeded!
2. Tighten the volume spacer with a torque of
2 Nm.
36
2 Nm