DT SWISS F 535 ONE Technical Manual page 19

6. Fix the fork 45° - 70° upright.
7. Fill 20 ml DT Swiss Fork Oil into the spring side of the lower unit.
8. Fill 20 ml DT Swiss Fork Oil into the damping side of the lower unit.
9. Allow the fork to rest in the previously fixed position for about 60 seconds to allow the
bushings to be lubricated.
10. Fully slide the lower unit onto the stanchions. Do not compress the piston rods of the spring
and damping unit.
11. Screw in the screw on the damping side counterclockwise into the lower unit using the tool
FXTXXXXXXXXXX018482S and tighten the screw with a torque of 12 Nm.
12. Screw in the screw on the spring side counterclockwise into the lower unit using the tool
FXTXXXXXXXXXX018482S and tighten the screw with a torque of 12 Nm.
27,5"
F 535 - technical manual
FXTXXXXXXXX018482S
29"
12 Nm
19