Sample Reports; Table 21: Sample Reports - Bosch D9068 Operation And Installation Manual

D9068 | Operation and Installation Guide | Appendix F: D8024/D10024/D10024A Analog
.
F.4.5 Sample Reports
Table 21: Sample Reports lists the sample reports and the data sent to the central
station. Refer to Appendix C: Fire Communicator Report Summary on page 56 for
information on the Equipment Fail Codes.
Table 20 does not show the event text that can be sent in Modem IIIa
format.

Table 21: Sample Reports

Report Description
Point Fire
Alarm Point 21,
Loop 3, Panel 5
Fire Point
Trouble Point 10,
Loop 1, Panel 2
Low Battery on
Panel 1
All Events Cleared
Peripheral 10
failed on Panel 3
FACP Ground Fault,
Panel 2 (Equipment
Fail #17)
General Disable
(any device on
Panel 4 disabled -
Equipment Fail
#32)
General Disable
Restoral (Panel 4
no longer shows
disables -
Equipment Restoral
#32)
Fire Drill Start
Panel 2
Fire Drill End
Panel 2*
Silence from
Panel 1
Report is not supported at this time.
*
Bosch Security Systems, Inc. | 3/13 | F01U071094-07
SIA
Code Description
FA421 Fire alarm
Fire
FT10
trouble
System
YT battery
trouble
RR
Equipment
ET110 failure
condition
Equipment
ET17 failure
condition
Equipment
ET32 failure
condition
ER32 Restoral
Fire Test
FI
begins
Fire Test
FK
ends
Heat or
KB1
bypass
Contact ID
Code Description
1 110 05
Fire alarm
421
1 373 02 Fire
010 trouble
1 302 00 Low system
000 battery
1 305 00
000
1 333 03 System
110 trouble
1 333 17 System
002 trouble
1 333 32 System
004 trouble
3 333 32 System
004 trouble
1 607 00 Walk Test
002 Mode
Walk Test
3 607 00
Mode
002
restore
1 400 00 Open or
000 close
FACP Operation
2
2
Modem IIa
Printer Text
Fire Alarm Area=5
Point=421
Fire Trouble Area=2
Point=010
Battery Low
Re-boot
Equip Fail SDI=110
Cond=003
Equip Fail SDI=002
Cond=017
Equip Fail SDI=004
Cond=032
Equip Restoral
SDI=004 Cond=032
Fire Walk Start
ID=002
Fire Walk End ID=002
Alarm Silence ID=001
Relay=001
69