Power; Appendix B: 4/2 Reporting Codes; Table 13: 4/2 Reporting Codes - Bosch D9068 Operation And Installation Manual

D9068 | Operation and Installation Guide | Appendix B: 4/2 Reporting Codes

Appendix B: 4/2 Reporting Codes

Table 13 lists the 4/2 codes supported by the D9068 Fire Communicator. Refer to
Section 5.4.6 PROG FORMATS, 2: RPT CODES, on page 45 for programming information.

Table 13: 4/2 Reporting Codes

4/2 Report Keypad
Code Number Key
1
SYSTEM IN TST [1]
1
SYS IN RPT [2]
1
SILENCE [3]
1
FIRE DRILL [4]
1
FIRE DRL RST [5]
OPEN RST RPT [6]
LOW BATTERY [7]
LOW BATT RST [8]
AC FAILURE [9]
AC FAIL RST [1]
AUTO TST RPT [2]
OFF NORM TST [3]
PHONE 1 TRBL [4]
PN 1 TRB RST [5]
PHONE 2 TRBL [6]
PN 2 TRB RST [7]
1
SYSTEM TROUB [8]
1
SYS TRB RST [9]
MAN TST RPT [1]
DATA LOST RP [2]
EEPROM FAIL [3]
1
RESET REBOOT [4]
SMK PWR TBL [5]
[6]
SMK PWR RSTR
GND FLT TRBL [7]
GND FLT RSTR [8]
1 Item is sent only when the D9068 is configured to communicate with a Bosch Security Systems, Inc.
D8024 or D10024/D10024A Analog FACP.
54
Group
Definition
Number
1 System in Test. Sent for Walk Test operations.
1 System in Test Restore. Sent for Walk Test operations.
1 Silence. Sent when the [SILENCE] key is pressed.
1 Fire Drill. Sent for fire drill operations.
1 Fire Drill Restore. Sent for fire drill operations.
1 Open Reset Report. Sent when the [RESET] key is pressed.
1 Low Battery: Sent when a low battery input is active.
1 Low Battery Restore. Restoral occurs when a low battery
input is active.
1 AC Failure. Sent when an AC Fail input is active.
2 AC Failure Restore. Restoral occurs for AC Failure.
2 Automatic Test Report. Sent for automatic communicator
tests.
2 Off Normal at Test. Sent if the control panel is off-
normal at the Automatic Test time.
2 Phone Line 1 Trouble. Sent for Phone Line 1 problems.
2 Phone Line 1 Trouble Restore. Sent for Phone Line 1
problems.
2 Phone Line 2 Trouble. Sent for Phone Line 2 problems.
2 Phone Line 2 Trouble Restore. Sent for Phone Line 2
problems.
2 System Trouble. Sent for general system problems.
2 System Trouble Restore. Sent for general system
problems.
3 Manual Test Report. Sent for manual communicator tests.
3 Data Lost Report. Sent if events occur too rapidly.
3 EEPROM Failure. Sent for EEPROM problems.
3 System power up and reboot.
3 Smoke Power Trouble. Sent for smoke detector power
supply problems.
3 Smoke Power Trouble Restore. Sent for smoke detector
power supply problems.
3 Ground Fault Trouble. Sent for ground fault trouble
problems.
3 Ground Fault Trouble Restore. Sent for ground fault
trouble problems.
Bosch Security Systems, Inc. | 3/13 | F01U071094-07