Maintenance & Care; Cell Explorer- Fluo - Nanolive 3D Cell Explorer-fluo User Manual

2. Maintenance & Care
fluo
3D Cell Explorer-
Maintenance and Care for the 3D Cell Explorer-
1. Carefully, open the shipment box with the top face up to avoid damaging the 3D Cell Explorer-
fluo
2. Handle the 3D Cell Explorer-
3. When moving the microscope, carefully carry it without lifting it from the camera and avoid any shocks.
4. Keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy shaking environments.
Make sure the table surface is flat, horizontal and firm.
5. All elements (e.g. microscope objective, mirrors, lenses) have been specially and carefully adjusted; please do
not dismount, reposition, or modify them. In such case the warranty becomes automatically void and rework
shall be charged to the customer.
6. Do not block the rotating arm or prevent it to rotate freely.
7. Do not disassemble any parts of the microscope, as this affects the function or reduces the performance of the
microscope. Please be aware that the warranty expires if you remove the covers.
8. Keep the instrument clean, and do not contaminate the optical elements when wiping away the dust on the
instrument. It is highly recommended to leave the red cap in place on the microscope objective when the
microscope is not in use in order to prevent contaminations to come on the optical surfaces.
9. Contaminations on the objective and the mirrors, like fingerprints and oil smudges, could be gently wiped with
the provided cleaning swab and a bit of alcohol (Ethanol or Isopropanol). More information on the cleaning
procedure to be found in section "Cleaning Procedure for the optical elements".
10. Do not attempt to use organic solvents to clean the microscope. To clean it, use a lint-free, soft cloth slightly
moistened with clear water.
11. During use, if the microscope is splashed by liquid, cut off the power at once, and wipe away the splash.
12. Place the instrument in a cool, dry position. When not using the microscope or carrying it, keep it covered with
the provided dust cover. Furthermore, protect the microscope objective with the red vinyl cover.
fluo
from the side or the bottom plate; unplug all cables before moving it.
fluo
.
go back to contents
à
6