Nanolive 3D Cell Explorer-fluo User Manual page 16

6. Start-up
Installation and setup
Important Information: It is critical to follow the installation and setup steps as described in the following pages to ensure the safety standards
of the CoolLED illumination system. Please refer to chapter 1: Safety Notes.
1. Install the 3D Cell Explorer on a stable, flat, horizontal and firm workbench.
• Lift the 3D Cell Explorer-
• Never lift the 3D Cell Explorer-
fluo
carefully out of the box by holding it at the indicated spots in the image below.
fluo
by holding the camera.
WARNING: Nanolive does not bear the damage produced by wrong handling of the
3D Cell Explorer-
In case of damages, Nanolive reserves the rights to examine the 3D Cell Explorer-
and verify how the damage occurred. All warranty claims will be cancelled in case of
mishandling the 3D Cell Explorer-
The warranty does not apply even if the 3D Cell Explorer-
accidental damage.
fluo
while it is removed out of its box.
fluo
by ignoring the instructions.
fluo
fluo
has been subject to
go back to contents go back to contents
à à
16