Safety Notes; Cell Explorer- Fluo - Nanolive 3D Cell Explorer-fluo User Manual

1.

Safety Notes

fluo
3D Cell Explorer-
Thank you for purchasing the Nanolive 3D Cell Explorer-
read the safety notes to ensure safe handling and usage of the device at all times. Failure to do so may result in personal injury or damage to other
items.
1. Safety Notes for the 3D Cell Explorer-
• Verify that the computer is plugged and grounded earthed
with its own power supply during usage with your 3D Cell
fluo
Explorer- .
• Switch the 3D Cell Explorer-
a power supply.
• Disconnect and lockout the power supplies of the 3D Cell
fluo
Explorer- before completing any maintenance work tasks
or making adjustments.
• Do not use electrical equipment in wet conditions or damp
locations.
• Do not clean tools with flammable or toxic solvents.
2. Supply the 3D Cell Explorer
supplies.
✔
fluo
. Before using your 3D Cell Explorer-
fluo
fluo
OFF before connecting it to
-fluo
only with the provided power
✖
fluo
and the CoolLED illumination system, carefully
3. No special laser safety required when operating the 3D Cell
fluo
Explorer- (Class I laser).
For measurements, the 3D Cell Explorer-
A Class I laser is harmless for your eyes under any circumstances and
thus does not require laser safety goggles when properly operated.
By no means should the user open the covers and thus have access
to the laser path within the microscope frame without a clear
authorization from Nanolive.
Operating the microscope in non-appropriate conditions may then
be a risk. It is thus forbidden for a non-authorized user to open the
covers and manipulate the laser.
✖
fluo
uses a Class I laser.
✖
go back to contents
à
3