Advertisement
Supertop
®
for Truck Installation Instructions
Engage J-Hook on Rear
Window
Orient the Rear Window with the plastic J-Hook
toward the top.
Align the J-Hook on the top of the window with the
J-Hook sewn into the top above the rear window
opening. Slide them together until the Rear Window
is centered in the opening.
Engage the zippers on each side of the window, but
do not close them yet.
Inside of Top
Rear Window
Rev. C 0811
J-Hook
Install Bulb Seal on
Tailgate Bar
Locate the Tailgate Bar and the Bulb Seal in the
parts kit. Slide the channel in the Bulb Seal over
the ledge on the Tailgate Bar.
Install Tailgate Bar on Rear
Window
Slide the Tailgate Bar onto the tube strip sewn to the
inside of the Rear Window. Place the Tailgate Bar in
the Tailgate Brackets on the Belt Rail Assemblies.
Close the zippers on each side of the window.
Close the fl aps on each side of the window over
the zippers and fasten the hook and loop.
Check that the tailgate closes on the Bulb Seal.
Slide Rear Retainer Bar
onto Rear Window
Fasten Hook
and Loop
Close
Zippers
76315 pg. 9
Advertisement
