Advertisement
Supertop
®
for Truck Installation Instructions
Secure the Front of the Top
Locate the loop strip sewn to the fl ap along the
front of the top. Fasten it to the Adhesive Hook Strip
installed along the front of the bed.
Do not make too many adjustments to
NOTE
this strip until the adhesive has com-
pletely cured, 72 hours after installation.
Attach Loop to Adhesive
Hook Strip
Adjust Bow Position
Place the Front Bow on the rear tooth at
the front of the Bow Mount Bracket.
Rev. C 0811
Front Bow
Front
Secure the Front of the Top
Start at the front corners of the top and work the
plastic strip sewn into the bottom of the panels
into the channel in the Side Belt Rail. Make sure
that the fabric loop sewn to the top is outside the
vehicle.
Place Bow in rear
tooth of Bow Mount
Bracket
Plastic Strip - Slip into
channel in Belt Rail
Make sure loop is
outside of vehicle
76315 pg. 7
Advertisement
