Installation Tips
Before you begin installing your new Trek Top Glide,
please read all the instructions thoroughly.
For easier installation, the top should be installed at a temperature above 72°F. Below this
temperature, the fabric may contract an inch or more, making it difficult to fit the vehicle.
It is normal for the fabric to contract and wrinkle when stored in the shipping carton.
Within a few days after installation, the fabric will relax and the wrinkles will disappear.
WARNING
Do not rely in any way on the components of this
product to protect against injury or death in the event of an accident.
Never operate the vehicle in excess of manufacturer's specifications.
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit and could
place occupants of the vehicle in a potentially dangerous situation.
WEAR SEAT BELTS AT ALL TIMES
Safety glasses should be worn at all
times when installing this product.
Tools
Drill Driver &
#2 Phillips
#2 Phillips Bit
Screwdriver
Adjustable
Wrench
P1 - 54922 Rev. D 0618
TREKTOP NX GLIDE 2-Door
T30 Torx
Vise-Grips
Driver
Safety
Glasses
Installation Time
4 hours
Skill Level
3 - Moderately Difficult
Vehicle Application:
Jeep® JK Wrangler 2007-2018
Part Number 54922
Support
We're here to help!
Go to www.Bestop.com and
click on "Contact Us"
© 2018 Bestop, Inc.