Advertisement
Quick Links
Installation Instructions
Fabric Replacement Top for Trektop NX
Installation Tips
Before you begin installing your new Trektop NX, please read
all the instructions thoroughly.
For a smooth fit:
For easier installation, the top should be installed at a temperature above
72º F. Below this temperature, the fabric may contract an inch or more,
making it difficult to fit the vehicle.
It is normal for the fabric to contract and wrinkle when stored in the ship-
ping carton. Within a few days after installation, the fabric will relax and the
wrinkles will disappear.
Safety glasses should be worn at all
times when installing this product.
Tools
Phillips
Utility Knife
Screwdriver
This product is designed primarily to enhance the appearance of the vehicle and to shield the occupants from ordinary weather conditions. Do not rely in
any way on the components of this product to contain the occupants within the vehicle, or to protect against injury or death in the event of an accident, This product will not protect
the occupants from falling objects. Never operate the vehicle in excess of manufacturer's specifications.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions provided when installing this product. Failure to do so may result in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
P1 - 52821 - Rev. B 1013
Safety
Glasses
Installation Instructions - Fabric Replacement Top for Trektop NX
Installation Time
1/2 Hour
Skill Level
2 - Moderately Easy
Vehicle Application:
Jeep Wrangler Unlimited TJD
2004 – 2006
Part Number: 52821
Support
We're here to help!
Go to www.Bestop.com and
click "Contact Us"
See a video showing
installation of this top at
www.bestop.com/video
© 2013 Bestop, Inc.
Advertisement
Related Manuals for Bestop 52821
Summary of Contents for Bestop 52821
- Page 1 Read and follow, precisely, all installation instructions provided when installing this product. Failure to do so may result in a poor fit and could place occupants of the vehicle in a potentially dangerous situation. Installation Instructions - Fabric Replacement Top for Trektop NX P1 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 2 Vehicle Application: Jeep Wrangler Unlimited TJD Installation Instructions 2004 – 2006 Fabric Replacement Top for Trektop NX Part Number: 52821 Installation Instructions - Fabric Replacement Top for Trektop NX P2 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 3 Qty - 1 Tailgate Bar Qty - 1 Tailgate Mount - Right Rear Bow Qty - 1 Qty - 1 Installation Instructions - Fabric Replacement Top for Trektop NX P3 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
-
Page 4: Included Parts
Fabric Top and Windows Used on Pages 10 – 22 Fabric Top Right Side Window Left Side Window Rear Window Installation Instructions - Fabric Replacement Top for Trektop NX P4 - 52821 - Rev. B 1013 © 2013 Bestop, Inc. - Page 5 Section 1 Page 5 Remove Side and Rear Windows Step 1 Step 1 Remove Side Windows and Rear Window. Installation Instructions - Fabric Replacement Top for Trektop NX P5 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 6 Door Surround on each side of the vehicle. Step 2 Loosen, remove, and discard Rear Strap. Installation Instructions - Fabric Replacement Top for Trektop NX P6 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 7 Door Surround Bracket. Repeat on from the slot in the windshield frame the other side of the vehicle. Installation Instructions - Fabric Replacement Top for Trektop NX P7 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 8 Release the J-Hooks on the rear bow flaps from the ends of the Rear Bow. Slide the Rear Bow out of the pocket in the Top Fabric. Installation Instructions - Fabric Replacement Top for Trektop NX P8 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 9 Remove the Oval Head Screw in the out- side holes on each side of the Header. Set all screws aside to be reused. Installation Instructions - Fabric Replacement Top for Trektop NX P9 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 10 Install an Oval Head Screw in the outside holes on each side of the Header. Installation Instructions - Fabric Replacement Top for Trektop NX P10 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 11 Top Fabric. Secure the J- Hooks on the rear bow flaps to the ends of the Rear Bow. Installation Instructions - Fabric Replacement Top for Trektop NX P11 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 12 Pull the release knob on the Side Bow and insert the pin into the Door Surround Bracket. Repeat on the other side of the vehicle. Installation Instructions - Fabric Replacement Top for Trektop NX P12 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 13 Thread the ends of the straps through the buckles and tighten. Tighten the speaker pod. Installation Instructions - Fabric Replacement Top for Trektop NX P13 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 14 Hook the strap to the ledge inside the rear buckle on one of the rear straps. corner of the vehicle. Repeat on both sides of the vehicle. Installation Instructions - Fabric Replacement Top for Trektop NX P14 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 15 Align the J-slide with the J-slide sewn into the rear of the Top. Slide them together until the Rear Window is centered in the opening. Installation Instructions - Fabric Replacement Top for Trektop NX P15 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 16 Stiffener will show at top of pocket when Squeeze sides of Stiffener to increase properly installed. curve. Slide into pocket in Side Window. Repeat with both Stiffeners. Installation Instructions - Fabric Replacement Top for Trektop NX P16 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 17 1-2". Repeat with the rear zipper and the zipper on the Rear Window. Repeat with both Side Windows. Installation Instructions - Fabric Replacement Top for Trektop NX P17 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 18 Push Plastic Reinforcement down to each side of the vehicle. make it easier to close zipper. Installation Instructions - Fabric Replacement Top for Trektop NX P18 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 19 Quarter Window into the channel in the the Tailgate Mounts. Tailgate Mounts on each side of the tailgate. Close the Rear Window zippers. Installation Instructions - Fabric Replacement Top for Trektop NX P19 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 20 Fasten the loop strip sewn inside the Top to the hook strip along the top of the Quarter Window on each side of the vehicle.s. Installation Instructions - Fabric Replacement Top for Trektop NX P20 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 21 Step 1 Step 1 Close Sunrider. Hook the latches on the Header into the holes in the windshield and close them. Installation Instructions - Fabric Replacement Top for Trektop NX P21 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 22 Slip the plastic strips above the doors into the channel in the Door Surround on each side of the vehicle.. Installation Instructions - Fabric Replacement Top for Trektop NX P22 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
- Page 23 Side Windows and Rear Window and storing them carefully. Fold the protective flaps over to engage the hook and loop tape. Installation Instructions - Fabric Replacement Top for Trektop NX P23 - 52821 - Rev. B 1013 © 2013 Bestop, Inc.
-
Page 24: Limited Warranty
Your Bestop product is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning and maintenance. Fabric: The fabric should be washed often using soap, warm water and a soft bristle brush Rinse with clear water to remove all traces of soap. Bestop recommends using Bestop Cleaner (part no. - Page 25 Su producto Bestop está hecho con materiales de la más alta calidad. Para mantener su apariencia nueva y alargar su uso al máximo posible, necesitará limpieza y mantenimiento periódicos. Tela: debe lavar la tela con frecuencia usando jabón, agua tibia y un cepillo de cerdas suaves. Enjuague con agua limpia para eliminar todos los residuos de jabón. Bestop recomienda utilizar el Limpiador Bestop (número de parte 11201-00) y el Protector Bestop (número de parte 11202-00).
- Page 26 Votre produit Bestop est fabriqué des meilleurs matériaux disponibles. Il devra être nettoyé et entretenu régulièrement afin de maintenir son apparence neuve et pour une durée d’utilisation maximale. Tissu : Le tissu doit être lavé régulièrement à l’aide de savon, d’eau chaude et d’une brosse à soies douces. Rincer à l’eau claire afin d’éliminer toute trace de savon. Bestop recommande d’utiliser le nettoyant Bestop Cleaner (no de pièce 11201-00) et le protecteur Bestop Protectant (no de pièce 11202-00).