Installation; Non-Hazardous Locations - Graco ProControl 1KE Instructions - Parts Manual

Installation

Non-Hazardous Locations

NOTE: Kits supplied with an AC/DC Converter are shipped with a North American 120 VAC power cord (E).
Users in areas with another standard voltage must provide a power supply cord with an IEC 320–C13 female
Technical Data, page 53
converter. See
Key:
A Flow Meter Fluid Inlet, 1/4 npt female
inlet/outlet.
B ProControl 1KE Module with Bracket
C Power Supply and Cable (6 ft., 2 m), to
terminal 3. See Cable Connections, page
D Meter Cable (50 ft., 15 m), to terminal 4. See
Cable Connections, page
E Power Cord (10 ft., 3 m), see NOTE above.
M Ground wire and clamp. PN 244524 in
included with kits to ground the ProControl
1KE Module. PN 238909 is sold separately
to ground the meter and other components.
N Fluid Regulator, 1/8 npt (f) outlet
3A2614H
for power requirements.
13.
13.
R Fluid Control Cable
Pressure Transducer
S
T I/P Transducer (Current to Pressure). See
Air Connections, page
U Mounting Panel.
Mounting Dimensions, page
X Pressure Transducer Fitting, 1/8 npt (f) inlet
and outlet
AA Light Tower with Splitter (accessory)
AE Flow Meter Fluid Outlet, 1/4 npt (f)
AF Pressure Transducer Cable
Installation
15.
See
44.
9