Allen-Bradley MicroLogix 1200 Reference Manual page 393

1
Protocol Configuration
Use the information in this appendix for configuring communication
protocols. The following protocols are supported from any RS-232
communication channel:
• DH-485
• DF1 Full-Duplex
• DF1 Half-Duplex Slave
• Modbus™ RTU Slave
• ASCII
This appendix is organized into the following sections:
• DH-485 Communication Protocol on page E-2
• DF1 Full-Duplex Protocol on page E-5
• DF1 Half-Duplex Protocol on page E-6
• Modbus™ RTU Slave Protocol (MicroLogix 1200 Controllers and
MicroLogix 1500 Series B and higher Processors only) on page E-9
• ASCII Driver (MicroLogix 1200 and 1500 Series B and higher
Controllers only) on page E-13
See your controller's User Manual for information about required network
devices and accessories.
E
Appendix
Publication 1762-RM001C-EN-P