Allen-Bradley MicroLogix 1200 Reference Manual page 339

Enter the following information:
Data Log Queue
Configuration Parameter
Number of Records
Separator Character
Date Stamp (optional)
Time Stamp (optional)
Address to Log
Current Address List
A record consists of configured Date Stamp, Time Stamp, Current Address List, and Separator
Characters.
(1) If the real-time clock is not present on the controller and Date Stamp and Time Stamp are selected (enabled), the date
is recorded as 00/00/0000 and the time as 00:00:00.
4. After entering all the information for the data log queue, click on OK.
The queue is added to the Data Log Que window with a
corresponding queue number. This is the queue number to use in the
DLG instruction.
Data Logging (MicroLogix 1500 1764-LRP Processor only)
Description
Defines the number of records (data sets) in the queue.
Choose the character to act as the separator for the data in this
queue (tab, comma, or space). The separator character may be the
same or different for each queue configured.
if selected, the date is recorded in mm/dd/yyyy format
if selected, the time is recorded in hh:mm:ss format
Enter the address of an item to be recorded and click on Accept to
add the address to the Current Address List. The address can be
any 16 or 32-bit piece of data.
This is the list of items to be recorded. Record size can be up to 80
bytes. You can use the Delete button to remove items from this list.
See page 22-3 for information on record size.
22-7
(1)
.
(1)
.
Publication 1762-RM001C-EN-P