Allen-Bradley MicroLogix 1200 Reference Manual page 189

• Bit Address - The source is the address of the bit to be transferred into
the bit array at the last (highest) bit position.
• Length - The length operand contains the length of the bit array in
bits. The data range for length is from 0 to 2048.
Addressing Modes and File Types can be used as shown in the following
table:
Table 14.9 BSR Instruction Valid Addressing Modes and File Types
For definitions of the terms used in this table see Using the Instruction Descriptions on page4-2.
Data Files
Parameter
File • • • • •
(2)
Control
Length
Source • • • • • •
(1) See Important note about indirect addressing.
(2) Control file only. Not valid for Timers and Counters.
You cannot use indirect addressing with: S, ST, MG, PD,
IMPORTANT
RTC, HSC, PTO, PWM, STI, EII, BHI, MMI, DAT, TPI, CS,
IOS, and DLS files.
File Instructions
Address
Function Files
Mode
•
Publication 1762-RM001C-EN-P
14-7
Address
(1)
Level
• • • •
• •
•
• • •