Allen-Bradley MicroLogix 1200 Reference Manual page 192

14-10 File Instructions
Publication 1762-RM001C-EN-P
Addressing Modes and File Types can be used as shown in the following
table:
Table 14.11 FFL Instruction Valid Addressing Modes and File Types
For definitions of the terms used in this table see Using the Instruction Descriptions on page4-2.
Data Files
Parameter
Source • • • • •
FIFO • • •
(2)
Control
Length
Position
(1) See Important note about indirect addressing.
(2) Control file only. Not valid for Timers or Counters.
You cannot use indirect addressing with: S, ST, MG, PD,
IMPORTANT
RTC, HSC, PTO, PWM, STI, EII, BHI, MMI, DAT, TPI, CS,
IOS, and DLS files.
Function Files
•
• •
Address
Address
(1)
Level
Mode
• • • • •
• • • •
• •
• •
• •