Chapter 2: Getting Started; Waking Up The Display And Putting It Back To Sleep; Using The Front Control Panel - SMART Board SBID-MX265 User Manual

Chapter 2
Getting started

Waking up the display and putting it back to sleep

Using the front control panel

Adjusting audio
Using the remote control
Using touch
Writing, drawing and erasing
This chapter explains how to wake the display when it's asleep, how to view connected
computers' input and how to interact with the display.
Waking up the display and putting it back to sleep
To wake the display, press the Power button
To return the display to a partial sleeping state, press the Power button
panel.
For information about turning the display off, see SMART Board MX200 series interactive displays
installation and maintenance guide (smarttech.com/kb/171257).
Using the front control panel
The front control panel contains the Power, Input Select, Menu,
Freeze, Mute and volume control buttons.
No. Name
1 Power
Input select
2
9 smarttech.com/kb/171284
on the front control panel.
SMART Board MX procedure
Press to wake the display.
Press to again enter Sleep mode.
Press to switch input source.
9
9
10
10
11
12
on the front control