Important Information - SMART Board SBID-MX265 User Manual

Important information

NOTE
Refer to the installation and maintenance guide for important information about installing and
maintaining the display (see More information on page 7).
WARNING
Do not open or disassemble the display. You risk electrical shock from the high voltage
l
inside the casing. Opening the casing also voids the warranty.
Do not stand (or allow children to stand) on a chair to touch the surface of the display.
l
To reduce the risk of fire or electric shock, do not expose the display to rain or moisture.
l
Do not insert objects inside the cabinet ventilation holes, because they could touch
l
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
Do not place heavy objects on the power cable. Damage to the cable could cause shock,
l
fire or product damage which may not be covered by the warranty.
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
l
fragments with care when disposing of them.
Disconnect all of the display's power cables from the wall outlet and seek assistance from
l
qualified service personnel if any of the following occur:
The power cable or plug is damaged
o
Liquid is spilled into the display
o
Objects fall into the display
o
The display is dropped
o
Structural damage, such as cracking, occurs
o
The display behaves unexpectedly when you follow operating instructions
o
Before inserting or removing the iQ appliance from the display, turn off the display using the
l
switch at the back of the display. See
more information.
i smarttech.com/kb/171284
Open Pluggable Slot computer (OPS) disclaimer for