Height Adjustable Removable Desk Armrests - progeo EXELLE User Manual

7.2 Height adjustable removable Desk armrests

(figure 86)
These are traditional armrests which do not need any support
accessory. The detachable armrests, in addition to the armrest
itself, include a skirt guard. Other types of skirt guard cannot be
mounted when using this model of armrest.
The detachable armrests are practical accessories which can be
removed to facilitate getting in and out of the wheelchair.
Push lever "A" downward to unblock the armrest and lift upward to
extract it (as indicated by the arrows in figure 86).
Fig. 86
To replace the armrest, re-insert it in the support "S" and lock it
into position again by lifting lever "A".
It is also possible to adjust the height of the armrest by rotating and
lifting the pin "B" and re-inserting it into one of the pre-drilled holes
on the armrest tube after adjusting the armrest to the desired
height.
Height adjustable removable Flip-up armrests
7.3
(figure 87)
The Flip-up armrests, in addition to the armrest itself, include a skirt
guard. Other types of skirt guard cannot be mounted when using this
model of armrest. These armrests are practical accessories which
can be rotated and removed to facilitate getting in and out of the
wheelchair.
Height adjustment: Rotate pin "P" by 90° , using both hands raise or
lower the armrest to the required height and then replace the pin in
one of the pre-drilled holes on the armrest tube.
Fig. 87
Rotation and removal: Turn lever "L" down to unlock the armrest,
then flip the armrest up rotating it backwards behind the backrest
line. In that position it is even possible to turn the armrest behind the
backrest.
To remove the armrest, rotate it until the two marks on the support
EXELLE 42