progeo EXELLE User Manual page 16

Fig. 20
2.11 Armrests
The model EXELLE can be provided with tubular armrests (fig.21),
Desk armrests (fig.22) or Flip-up armrest (fig.23)
The armrests are considered as an accessory and they
have to be ordered separately. They are particularly
useful for people with reduced mobility of their hands or
arms and for those with limited upper body movement
who require better stability once seated in the
wheelchair.
Fig. 21 Fig. 22
2.12 Fasteners
Fig. 23
The armrests must not be used to carry the
wheelchair or as a support.
The tubular armrests are only locked when they are in
their standard position for use (facing forwards and
parallel with the sides of the wheelchair) (see fig. 21).
In all other positions they can turn and for this reason
always ensure that they are correctly positioned
before use (see chapter 7.1 "Height adjustable,
removable, swingaway armrests").
If this instruction is ignored the wheelchair or the
user may overbalance.
Do not use the armrest as hand hold to raise the
wheelchair; this may cause the armrests to come
off from their supports and in turn cause harm to
the user and to the wheelchair
Do not use the armrest as supports when making
transfer .We indeed recommend to swing the armrest
away on the side of the transfer so as to help the
operation.
After each maintenance cycle ensure that all nuts, bolts
and screws are correctly tightened as they may loosen
during normal daily use.
We recommend checking that all hardware is
correctly tightened at least once a month.
If necessary consult an authorized
dealer or technician.
®
PROGEO
EXELLE 16