progeo EXELLE User Manual page 22

grip one backrest handle and raise the chair a few
centimetres.
Push the seat down (figure 33).
Fig. 33
Check the seat tubes are well inserted in their supports (see
chapter 2.8 "Seat tubes insertion check").
Lower the footplate
5.3 Closing system
(figure 35)
Remove the cushion or other supports from the seat and/or
backrest.
Raise the footplate
With your hands on position "A" and "B" as shown in figure
35, pull the seat cloth up to bring the two seat tubes close to
each other so as to fold the wheelchair.
Fig. 35
Fig. 34
5.4 Lifting the wheelchair
The wheelchair can be lifted and transported in many
different ways. However it is advisable to fold the
wheelchair to facilitate these action. Remove the rear
wheels (see chapter 5.5 "Quick release rear wheels") to
A
B
(figure 36)
EXELLE 22