progeo EXELLE User Manual page 36

indicated by the arrow, (fig. 62) until the desired position is
reached.
Finally tighten the two bolts.
Fig. 62
Position of the one-piece footplate
If requested on the order form the one-piece carbon fibre footplate
can be mounted in two different positions: completely internal
(fig.63) or completely external (fig.64). These configurations
depend exclusively on how the parts are assembled. When
raised, this footrest can be rotated by 180° (fig.6 5) so as to
reduce the encumbrance if set as completely external.
Fig. 63 Fig. 64
One piece flip-up aluminium footplate
The flip-up system, the
engaging system and the
inclination adjustment for
this footplate (figure 66)
are exactly the same as
the carbon fibre footplate
just explained above.
Position of the one piece footplate
If requested on the order form the one-piece aluminium footplate can
be mounted in four different positions:
and 67), 2/3 internal (figure 68), 2/3 external (figure 69), completely
external (figure 70).
the parts are
Fig. 65
These configurations depend exclusively on how
assembled.
Fig. 67 Fig. 68
When the position of the footrest is changed, check
carefully that, when rotating, the front wheels do not
touch the footrest
and fork angle adjustment").
Fig. 66
completely internal (figure 66
Fig. 69 Fig. 70
(see chapter 6.5 "Front wheel height
EXELLE 36