progeo EXELLE User Manual page 18

If the occupant has to be transported while seated in
the chair you are reminded that the wheelchair in its
standard configuration
seatbelts. Any safety belts for vehicle transport must
be installed by specialised personnel.
Transport with an attendant
(see fig. 24-25-26-27)
In cases where the physical limitations of the occupant prevent
him/her from moving and loading the wheelchair into the car on
his/her own, the help of an attendant will be required.
The lightness and reducibility of the EXELLE are very important
because they allow the wheelchair to be moved easily even by
those with limited physical strength.
Disengage the brakes
and remove the rear
wheels (see chapter 5.5
"Quick release rear
wheels") (see figure 24).
Fold the wheelchair (see
chapter 5.3 "Closing
system"").
Take hold of the chair with
one hand on the front
frame and the other hand
on the backrest handle
so as to balance the
weight of the wheelchair
and make lifting it easier.
is not supplied
Fig. 24
Load the wheelchair on
boot of the car (fig. 25)
with
Finally load the
wheels (figure 26).
Thanks to its reduced encumbrance when folded, the wheelchair
can be loaded in the boot of the car (figure 26) or between the front
and rear seats (see figure
Fig. 26
rear
Fig. 25
27).
Fig. 27
EXELLE 18