Manager Settings; Access Points - Grandstream Networks GWN76 Series User Manual

Manager Settings

The Master (Manager Address) and Port can be found here to GWN7624 be discovered by the Manager.
Manager Address
Manager Port
Allow DHCP Option 43
Override Manager Address
Debug
Core Files
when a crash event happens on the unit, it will automatically generate a core dump file that can used by engineering team for
debugging purposes.
Ping/Traceroute
Allows the users to Ping and traceroute. Input the target's IP address or URL and click on run.
One key Debug
Allows to capture Wireless, Portal or Mesh traffic and logs will be found in Core Files.
SSH Remote Access
Enables the SSH remote access on the slave AP.
Log
Allows the users to retrieve the logs generated for troubleshoot purpose.

ACCESS POINTS

From the access points page, the administrator can monitor different information regarding the access points of the selected
network, this section is separated into 2 sub-sections: Status and Configuration.
Slave AP manager settings
Enter the IP address of the GWN Manager
Enter the port set for the GWN Manager
This configuration will not be effective if AP has been managed by cloud.
Manager settings
Slave AP debug