Access Points - Grandstream Networks GWN76 Series User Manual

Core Files
when a crash event happens on the unit, it will automatically generate a core dump file that can used by engineering team for
debugging purposes.
Ping/Traceroute
Allows the users to Ping and traceroute. Input the target's IP address or URL and click on run.
One key Debug
Allows to capture Wireless, Portal or Mesh traffic and logs will be found in Core Files.
SSH Remote Access
Enables the SSH remote access on the slave AP.
Log
Allows the users to retrieve the logs generated for troubleshoot purpose.

ACCESS POINTS

From the access points page, the administrator can monitor different information regarding the access points of the selected
network, this section is separated into 2 sub-sections: Status and Configuration.
Status
The Status page lists all the access points assigned to the selected network, along with the possibility to perform some basic
operations such as locating the device (LEDs start blinking in White) or clear the usage data, also users can check more
detailed information about each access point and benefit from useful debugging tools which can help diagnose issues when
they appear.
Access Points – Status
To get more detailed information about the status of a specific access point, users can click on the desired AP then a page
similar to the following will show up:
AP Info