System Settings; Maintenance; Basic; Table 19: Basic - Grandstream Networks GWN76 Series User Manual

Maintenance

Users can access Maintenance page from GWN76XX WebGUI→System Settings→ Maintenance.

Basic

Basic page allows Country and Time configuration.
Field
Rebind Protection
Legacy TLS Compatibility
Web HTTP Access
Web HTTPS Port
Country
Scene
Time Zone
NTP Server
Date Display Format
Reboot Schedule

SYSTEM SETTINGS

Table 19: Basic

Description
Anti-domain name hijacking protection. If enabled, when the address
returned by the superior DNS is a private LAN address, it will be regarded as
a domain name hijacking, thus discarding the analytical result. If disabled,
the analytical results will not be discarded.
Due to the security enhancement, unless Legacy TLS Compatibility (only
available on 1.0.15.4 or higher version) is enabled, master AP on 1.0.15.4 or
higher firmware will not compatible with slave AP on firmware lower than
1.0.15.4. Master AP on firmware lower than 1.0.15.4 will also not be
compatible with slave AP on firmware 1.0.15.4 or higher. Cloud and GWN
Manager will still support both firmwares. Default is enabled.
Enables Web HTTP Access. By default, it's disabled.
Specifies HTTPS port. By default, is 443.
Select the country from the drop-down list. This can affect the number of
channels depending on the country standards.
Depending deployment type (Indoor or Outdoor) then additional 5Ghz
channels (DFS Channels) will be available to be used. This option is only
available for certain countries and only effective for GWN7600LR (CE),
GWN7630LR and GWN7630 (CE and FCC).
Configure time zone for the GWN76XX.
Make sure to reboot the device to take effect.
Configure the IP address or URL of the NTP server. The device will obtain
the date and time from the configured server.
Change the Date Display Format, three options are possible YYYY/MM/DD,
MM/DD/YYYY and DD/MM/YYYY.
Select the time schedule when AP will be rebooted.
GWN76XX User Manual
Version 1.0.15.x
P a g e | 89