Seat Mii Owner's Manual page 89

Complete operations only in the sequence giv-
en:
Detach the number plate light carefully from the
2.
bumper.
Turn the bulb holder with the bulb anticlockwise
3. and remove it in the direction of the arrow
›››
Fig. 89.
4. Replace the faulty bulb by a new identical bulb.
Place the bulb holder in the number plate light and
5. press in the opposite direction to the arrow as far
›››
as possible Fig. 89.
Insert the number plate light carefully into the left
edge of the opening on the bumper. During this
6. process, check that the assembly direction of the
number plate light is correct, i.e. the spring must
be on the right.
Insert the number plate light into the bumper until
7.
it audibly clicks into place.
Fuses and bulbs
Changing the side turn signal bulb
Removing the side turn signal
Fig. 90
Side turn signal: Changing the bulbs.
Fig. 91
Complete operations only in the sequence giv-
en:
With one hand move the side turn signal back-
1.
›››
wards Fig. 90 .
1
Remove the side turn signal from the chassis by
2.
leverage .
2
Complete operations only in the sequence giv-
en:
Remove the bulb holder with the bulb in the direc-
3.
›››
tion of the arrow Fig. 91 .
1
Remove the bulb holder bulb in a straight direc-
4.
tion.
5. Replace the faulty bulb by a new identical bulb.
6. Install the lamp holder.
Place the side turn signal on the chassis on the
side situated towards the rear of the vehicle until
7.
the spring clicks into the other side of the side turn
signal.
87