Table of Contents
Advertisement
Luggage compartment variable floor
A: open the boot variable floor. B:
Fig. 132
raised boot variable floor.
Transport and practical equipment
C: extend the boot downward. D: ex-
Fig. 133
tend the boot forward.
Raise and lower the boot floor
●
To raise the floor, raise handle
›››
Fig. 132
in the direction of the arrow
1
and pull from the floor all the way up
›››
Fig. 132
B.
●
To lower it, guide the floor downward.
Extend the boot downward
●
Raise the boot floor and push it downward
›››
in the rail
Fig. 133
C (arrows)
●
Place the variable floor over the floor lining.
If necessary, fold the backrest of the rear
●
›››
seat forward
page
121.
Extending the luggage compartment forward
Disassemble the luggage compartment tray
●
›››
page
122.
Disassemble the rear headrests
●
●
Fold the backrest of the rear seat forward
›››
page
121.
●
If necessary, expand the boot downward.
CAUTION
Do not let the luggage compartment floor fall
when closing it. Always carefully guide it
downward in a controlled manner. Otherwise,
the lining and the floor of the boot could be
damaged.
Class N1 (commercial) vehicles
For safe vehicle operation, the electrical sys-
tem must work perfectly. Special attention
should be paid so it is not damaged during
adjustment, loading and unloading of trans-
ported objects.
Fastening rings*
In the front part of the luggage compartment,
there may be fastening rings to secure the
luggage.
In order to use the fastening rings, they must
be lifted beforehand.
›››
page
53.
»
123
Advertisement
Table of Contents
