Table of Contents
Advertisement
●
Fasten the seat belt or pass it around the
child seat structure in the manner described
in the manufacturer's instructions.
●
Make sure the seat belt is not twisted.
●
Insert the latch plate into the buckle for the
appropriate seat and push it down until it is
securely locked with an audible click.
●
Ensure that the upper belt web lies tightly
on the child seat.
Securing the child seat with the lower anchor points (ISOFIX)
On the vehicle seat: identification var-
Fig. 25
iants of the anchor points for the child seats
20
The essentials
●
Pull the belt (it must be no longer possible
to pull the lower belt webbing out).
Removing the child seat
The seat belt must not be unfastened until
the vehicle has come to a standstill
●
Press the red button on the buckle. The
latch plate is released from the buckle.
Each seat of the rear seat bench has two re-
tainers named lower anchor points.
Overview of ISOFIX installation
In compliance with European directive
ECE 16, The following table details the instal-
lation possibilities for ISOFIX child seats with
the lower anchor points in each of the vehicle
seats.
The permitted body weight for the child seat
or information regarding size A to G is indica-
●
Guide the belt back by hand so that it rolls
up easily and the trim will not be damaged.
●
Remove the child seat from the vehicle.
WARNING
›››
.
Unbuckling the seat belt while the vehicle is
in motion can cause severe or fatal injuries in
the event of an accident or sudden braking.
The seat belt must not be unfastened until
●
the vehicle has come to a standstill.
ted on the label on the child seat with "uni-
versal" or "semi-universal" certification.
Advertisement
Table of Contents
