Seats And Head Restraints - Seat Mii Owner's Manual

Hide thumbs Also See for Mii:
Table of Contents

Advertisement

Seats and head restraints

Adjusting head restraint
Removing and fitting the rear head re-
straints
Removing the rear head restraint
Fig. 115
The rear seats are equipped with a head re-
straint.
Removing the rear head restraint.
Unlock the seat backrest and fold it forward
›››
page
120.
Push the head restraint up as far as it will
›››
go
.
Pull the head restraint out of the fitting
›››
without releasing the button
Fold the backrest of the rear seat backward
again until it is engaged.
Seats and head restraints
Safely store the removed head restraints.
Fitting the rear head restraint
Unlock the seat backrest and fold it forward
›››
page
120.
Insert the head restraint into the guides on
the seat backrest.
Push the head restraint down as far as it
will go while pressing button
Fold the backrest of the rear seat backward
again until it is engaged.
Adjust the head restraint to the correct po-
›››
sition
page
WARNING
Travelling with the head restraints removed
or improperly adjusted increases the risk of
severe or fatal injuries in the event of acci-
dents and sudden braking or manoeuvres.
Always fit and adjust the head restraint
properly whenever a person is occupying a
seat.
Refit any removed head restraints immedi-
ately so that passengers are properly protec-
ted.
CAUTION
When removing and fitting the head restraint,
Fig. 115
.
1
make sure it does not hit the headliner of the
vehicle or the front seat backrest. Otherwise,
the interior roof and other parts of the vehicle
could be damaged.
.
1
55.
Seat functions
Seat heating*
Fig. 116
In the centre console: Front seats
heating switch
The front seat cushions can be heated electri-
cally when the ignition is switched on.
Switch off seat heating if there is nobody in
the seat.
›››
Function
Action
Fig. 116
Activate
Press button . Seat heating is
switched on fully. All warning sig-
nals light up.
Adjusting the
Press the button  again to adjust
heating output
the desired heat.
Deactivating
Keep pressing button  until all of
the lights are switched off.
»
111

Advertisement

Table of Contents
loading

Table of Contents