Table of Contents
Advertisement
Complete operations only in the sequence given:
Fig. 83
Dipped beam and main beam headlights
1.
Remove the bulb connector H4. Remove the rubber cover using
2.
Press the retaining clip
3.
4.
Insert the bulb, return it to its position and insert the retaining
5.
Place the rubber cover and check that is in the correct position.
6.
Note
The images show the left hand headlight
from behind. The structure of the right hand
side headlight is symmetric.
84
A
the tabs.
downwards in the direction of the ar-
D
row, and unclip sideways and remove it.
Remove the bulb from the holder. If necessary, press the lock on the bulb holder.
clip
D
Insert the connector to the bulb H4.
Emergencies
B
Side light and daytime driving light
›››
page
186.
Open the bonnet
Turn the bulb holder in an anticlockwise direction as far as it will go and remove it, along with
Replace the faulty bulb by a new identical bulb.
Insert the bulb holder in the headlight and
turn it clockwise as far as the stop.
C
Turn signals (front)
the bulb, pulling backwards.
Insert the bulb holder in the headlight and
turn it clockwise as far as the stop.
Advertisement
Table of Contents
