Table of Contents
Advertisement
To replace the front bumper bulbs
In the front right wheel arch: Remove
Fig. 84
the retaining screws (arrows) and take out the
expansive rivet
.
A
Changing the bulbs in the headlights
Fig. 85
Fuses and bulbs
Complete operations only in the sequence giv-
en:
Unscrew the 2 retaining screws of the wheel arch
›››
1.
trim
Fig. 84
(arrows) with the screwdriver from
›››
page
74.
the vehicle took kit
Unscrew the expansive rivet in the lower front part
of the wheel arch trim
with the screwdriver
A
2.
from the vehicle tool kit and completely remove it
›››
page
74.
3.
Carefully fold the wheel arch trim to the side.
›››
Release the connector
Fig. 85
1
4.
it.
›››
Turn the bulb holder
Fig. 85
in the direction of
the arrow, in an anticlockwise direction as far as it
5.
will go and remove it, along with the bulb, pulling
backwards.
6.
Replace the faulty bulb by a new identical bulb.
Insert the bulb holder in the headlight and turn it
7.
clockwise as far as the stop.
Plug the connector
into the bulb holder. The
1
8.
connector must audibly click into place.
9.
Replace the wheel arch trim into its position.
Place the expansive rivet in the wheel arch trim
10.
and bumper and press it completely inwards
›››
Fig. 84
.
A
Securely screw the 2 retaining screws
11.
(arrows) with a screwdriver.
Changing the bulbs in the rear lights
and remove
On the side of the luggage compart-
Fig. 86
ment: A: Remove the cover, B: Removing the
tail light units
›››
Fig. 84
»
85
Advertisement
Table of Contents
